FindTape Anti-Slip Glow Line Safety Grip Tape
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
BACKORDER NOTE *** you can choose to be notified via text when an item is back in stockItem is expected in approximately 7 day(s)
Product Description
FindTape AST-GL Anti-Slip Glow Line Safety Grip Tape is a cost-effective, anti-slip glow in the dark tape that provides visual aid and safe guidance along with slip protection in low light or no light situations (or during disasters like fire, earthquake, power failure, and more.). AST-GL is a self-adhesive, anti-skid tape that can be applied over almost any surface that provides an instant non-slip surface which can be used on staircases, walkways, ledges, steps, stair nosings, access areas, entrances, exits, or anywhere else that needs strong, power-free lighting to ensure safe areas. Offered in long 60 foot lengths. This meets safety regulations OSHA 29CFR part 1910.23 and CoF Standards for Americans with Disabilities Act 2008 and is NFSI Certified. The contrast in color between the black safety grip coat and the photoluminescent strip on the center of the roll allows the glow to be highly visible.
AST-GL is 30 millicandelas per m2 at two minutes and glowness decreases to 5 millicandelas after ten minutes. The tape is charged by either natural or artificial light (approx. 2 hours for a full charge), with the photons storing the light as energy and releases it as a bright green glow when it’s in the dark. This is a very durable tape as it is water, chemical and motor oil resistant. Since the photoluminescent tape is placed in the middle of the roll, it is less prone to be stepped on directly with foot traffic which allows the tape to have a longer performance life.
Applications
- At home on a balcony or deck steps
- Kitchens and bathrooms
- School
- Garage
- Loading docks and access ramps
- Marinas and docks
- Skateboards and ramps
- RV steps
- Industrial facilities
Technical Information
FindTape Anti-Slip Glow Line Safety Grip Tape
- Standards Met: OSHA 29CFR part 1910.23, CoF Standards for Americans with Disabilities Act 2008
- Adhesive: solvent acrylic How are adhesives different?
- Thickness: 4 mils (carrier) What is mil thickness?
- Tensile Strength: 13.2 pounds per inch (longitudinal)
- Service/Operating Temperature: -22°F to 158°F
- Elongation: 25%
- Core: 3" diameter
- Weight: 1 pound 11 ounces
- Shelf Life: 1 Year, minimum
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
AST-GL Standard sizes
ITEM SIZE | ITEM # |
ITEMS PER CASE |
QUANTITY ORDERING |
PRICE PER ITEM |
PRICE PER CASE |
2 in. x 60 ft. | AST-GL/ 260
UPC = 692764160863 | 4 | Single Item (1-3 Items) 1 - 4 Cases (4-19 Items) 5 - 9 Cases (20-39 Items) 10+ Cases (>= 40 Items) | $21.83 $21.17 a 3% discount $20.82 a 5% discount $20.46 a 6% discount | |
Question & Answers
User Reviews
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).